A number of MSU departments provide bike-related services to their staff to encourage them to ride bikes more often for a host of reasons that are well known. This blog articleillustrates some of those bikes at work around campus. The following are additional services & amenities that have been installed and/or purchased by departments. Consider asking your department administration about providing something similar to improve the bike-friendliness of your department. Our departmental fleet services are described on this page of our website.
Cyclotron Secure Bike Parking facility:
One of the newest department facilities on campus, this secured bike storage facility offers space for approx. 40 bikes under cover and behind fencing that is card-access controlled. It also features a security camera to monitor access. The Cyclotron has also had a traditional key-access bike locker on their premises for a number of years that’s been available to 2 bicyclists at any given time. A video tour of the facility can be seen here. Questions about this facility can be sent to Tim Potter. Here are some photos of the facilities:
The Cyclotron’s secure bike parking facility.
Features upgraded racks to assure higher capacity parking and to keep the bikes upright better than other designs.
Cyclotron’s bike locker (being reviewed by a visitor)
Bio-Engineering Secure Bike Parking Facility:
One of the newest research buildings on campus, the four-story, 130,000-square-foot Bioengineering Facility, features a nice secure MSU ID card-accessible bike parking facility on the exterior for area staff to use. While it doesn’t feature a roof over the parking this is certainly a much improved amenity for staff in the buildings in this area who are concerned about the security of their bikes while at work. This facility will be opening soon. It is located between the Life Science and the Clinical Center buildings in the South Academic District. Questions about this facility can be sent to Tim Potter. Here are some photos of it as of taken this past summer:
Infrastructure Planning and Facilities’ Bike Services:
Employees of this large department have had the use of a growing fleet of bikes for decades. Oftentimes trips to buildings on campus to check into maintenance issues can be easily done by bicycle to minimize costs to the department and provide options for staff to get some exercise and fresh air during their work day. On the nicer days of the year it’s not uncommon for the 30 bike fleet (as of 10/18/16) to be in use. Jeff Groll, the bike fleet manager for IPF, reports that of the 30 bikes in the fleet 6 are available for checkout by any IPF staff and the rest are assigned to individual employees. Some of those assigned bikes even feature electric-assist systems to make the bike trips even less of a physical challenge as well as extending the possibilities of trips that can be done by bike. Questions about the IPF bike fleet can be sent to Jeff here. This IPF article (Aug. 2014) features the story of Gus Gosselin, who championed bike use within IPF for many years for additional background information.
Additionally, IPF has provided access to a bike locker for employees at the Simon Powerplant for a number of years. Staff at this facility found the work environment inside to not be conducive for storing bikes inside, so the locker has helped provide an great alternative for some of their regular bike commuters with nicer bikes. Some pics of that locker below:
The locker is located on the east side of the powerplant.
A visitor checks out the locker with Gus Gosselin.
Gus demonstrates how his work bike can easily be stored.
I was out on campus the other day and saw a pretty nice bike locked up in a particularly bad way which prompted me to take some more pics of other bikes in the same area to show how to both NOT lock up and how to best lock up your bike. I also included some pics of some helpful anti-theft devices that we sell in our Center to help you avoid becoming a victim out there plus a few examples of what can get your bike impounded by the MSU Police. Check out the picshere(click on the pics in the gallery to get captions/ more info).
The Basic Rules:
Use the best lock you can afford (U-shaped locks are generally the strongest when used correctly) if you want to prevent theft of your bike. We sell a good selection of U-locks but refuse to sell cable locks as over 90% are to blame for bike thefts.
Lock your bike correctly (see pics in the gallery linked above) to a good bike rack or, lacking a good rack, to something that’s not movable and/or easily cut (on campus the ordinance requires that you lock to bike racks to avoid impoundment).
Lock your bike in an area that’s highly visible; more secluded areas tend to have more theft as fewer people can potentially catch them in the act.
If your bike is flashy (i.e. newer, bright colors), and expensive it’s best to NOT lock up outside at night ever; use your residence hall bike room if it has one (3/4 of residence halls on campus have them; check at your front desk).
Secure any components that have quick-release mechanisms with anti-theft type mechanisms (we sell them in the Center). Seats and wheels are commonly stolen when they have quick releases.
More anti-theft tips:
Ever forget your lock and need to lockup for a quick visit to a store or cafe? Here are a few quick tips:
Take your front wheel inside with you.
Release the quick-release on your rear wheel; as soon as the would-be thief tries to ride off the rear wheel will shift in the frame and lockup (only works on bikes without vertical drop-outs).
Use your helmet and strap it thru your rear wheel and frame.
This one is more complex, only works with certain brakes and requires some forethought: adjust one of your brakes with the releasein the open position then close it when necessary to lock your brake.
You come out to your locked bike and are in a hurry to get to class. You quickly jam your key in the lock, try to turn it and it just doesn’t want to turn, so you turn harder, and harder til “SNAP” it goes and now you have to walk or take the bus. ARRGGHHH!
Does this scenario sound familiar? Well, you’re not alone. The good news is that this headache is preventable with a little forethought.
According to a bunch of people who work with thousands of bikes on campuses around the country it seems that virtually every U-lock made will eventually develop rust inside the lock. When you add ice to the rusty mess opening U-locks can become very frustrating not to mention expensive if you break your key.
Thanks to one of those campus bike specialists, John Brandt, here’s your solution to eliminating your ‘U-lock Woes’:
The simple solution I’ve found is to put an occasional drop of heavy oil on the moving parts of the locking mechanism that engage the u-bar portion of the lock. Some of the lube may find its way back into the lock tumblers, but in every case I’ve worked on it’s the sliding-locking-bar/pin that was the problem. Simple lubrication seems to prevent the problem from ever occurring and usually fixes it if it does.
take the lock apart into its two parts
set the u-portion aside, it’s just an inert piece of metal
turn the key to make the lock mechanism move to the locked position
as you turn the key, look into the holes where the u-portion fits
some u-locks will only lock one side, other will lock at both ends (photo shows a one-sided mechanism)
drip several drops of machine oil (or chain lube) onto the part that you see moving when you turn the key; this is the sliding-locking-bar/pin that engages the u-portion (see photo below)
work the key back and forth a few times to get the oil between the moving parts
once they move smoothly again, the key should no longer bind and you’re good to go
Even with a frozen/stuck u-lock, there is one thing you can try as long as the key isn’t broken off in the lock and unable to be removed. Squirt copious amounts of a thin penetrating oil (like WD-40) down the tiny seams where the u-portion enters both sides of the bar of the u-lock (see photo below). Do it on both sides and don’t be shy with the amount; flood it good. Squirt a tiny bit right into the keyhole, too, just in case. If you’re willing to wait a few minutes for the oil to penetrate, you may find that the key turns again if you start by gently wiggling it back and forth to help the oil penetrate even further. That works on better than 90% of the stuck locks I’ve worked on. I do not use thin oils like WD-40 to lube locks once they’re working again; it washes off too quickly so I use a heavy lube for that.
For preventive maintenance:
Check your lock whenever you lube your chain
If the turning key seems to bind or turn stiffly, re-lube those parts (you already have your lube in your hand)
Prevention is key. If you leave your bicycle outside in the rain a lot, lube the lock more often; the more it rains, the more often you should re-lube the mechanism